With the continuous upgrading of the company's products and the increasing increase in the output value of industrial materials, the problem that there is no time to deal with the manual burning of oxygen in many slag pots becomes more and more outstanding. In order to solve this problem, after investigation and feasibility analysis, Kunfeng Foundry and Technology Department finally decided to introduce slag pot separator.
The series of steels produced by Kunfeng casting, such as medium and high carbon, Japanese standard medium and high carbon, cold heading steel, etc., have high requirements for product quality. during the production process, the ladle needs to be partially injected to ensure the purity of molten steel. however, the remaining few remaining steel and steel slag mixed into the slag pot, it will lead to the phenomenon of slag pot agglomeration. Because the slag block is large and wrapped in molten steel, after the slag pot is transported to the slag workshop, the slag block can only be broken by manual burning oxygen, this treatment method is both time-consuming and laborious, and a lot of yellow smoke will damage the environment in the process of burning oxygen.
For this reason, Kunfeng Foundry introduced 10 sets of slag pot separators for trial, and the effect is good. Therefore, the factory began to use in batches, and the steel slag in the slag pot was separated in a block before it was solidified, and the steel slag was condensed in a small block after turning the slag pot, which not only reduced the treatment process of the slag workshop, saved the manpower cost and oxygen consumption, but also did not pollute the environment. After the implementation of this measure, the annual production cost of the company was reduced by more than 3 million yuan.
Kunfeng Foundry is a professional slag pot manufacturer, our products have higher performance-to-price ratio and better quality, Kunfeng Foundry knows more about the interests of customers. Produce slag pots.