Problems needing attention in processing Slag Tank

KUNFENG® casting steel slag tank is a professional slag tank manufacturer, which is more complex in the whole processing process of the product, so special attention will be paid to it in the course of operation. The following are the problems that should be paid attention to during processing by KUNFENG® casting steel slag tank:

1. The equipment for processing the slag tank needs to be inspected as a whole before the operation, and the operation is strictly prohibited if there is any fault.

2. the operation must be focused, the employees should cooperate with each other, and keep in mind that the operators are prohibited from operating in a state of irritability or fatigue, mainly in order to avoid accidents.

3. After all the personnel leave the work area, take away the sundries on the workbench before you can turn on the power supply for the safe processing of the slag tank.

4. Once the machinery is started, the operator shall not leave the working area except in special circumstances, and it is forbidden to touch the moving parts of the machine.    To use the correct tool to touch the casting, if there is an abnormal sound or equipment failure during the processing of the slag tank, turn off the power immediately and check the problem.

5. When replacing the slag tank and other castings, turn off the power supply, and when everything is adjusted, the slag tank castings can be replaced for processing.

If the slag tank casting processing needed, you can contact us directly, large slag tank casting steel plant will serve you whole heartedly!