The slag pot is easily affected by what factors

Slag pot is no stranger to everyone, and it is an indispensable large steel casting in the metallurgical industry. Manufacturers in the production is according to its structure, material, size, weight and drawing requirements, to choose the appropriate casting process, any one of the links of production and operation due to improper operation will affect the quality and life of the casting. What factors are easy to affect the manufacturers in the production of slag pots?

First of all, in the production of the shape of the slag pot needs to be designed, according to the Settings placed good cold iron, riser, pouring system or casting steel bar.

Secondly, it is necessary to consider the rationality of the design from the technological characteristics of the casting slag pot to avoid the occurrence of large steel casting-slag pot defects in advance.

In addition, after the design and casting process of the slag pot are determined, the manufacturer needs to produce in strict accordance with the technological process in the production and processing. Of course, the workers of the manufacturer also have rich experience in operation to produce smoothly.

Last but not least is the quality of raw materials. As the saying goes, "a journey of a thousand miles begins with a single step", if the raw material of the casting is not guaranteed from the source, it is easy to appear in the subsequent production of various defects of the casting such as pinhole, porosity, shrinkage hole, sticky sand and so on. Seriously affect the inner and outer quality of the slag pot, especially the use of the slag pot, is used to contain the high-temperature slag produced in the process of steel smelting, so for the slag pot, these are not allowed to exist, must be of high quality.