The requirements for the casting quality of the slag pot are as follows: the inner surface of the slag pot must be smooth and smooth, there must be no convex and concave defects exceeding 5mm, the T...
In so many studies, Kunfeng cast steel has also overcome various difficulties in its development in order to provide customers with high-quality slag pots.
steel castings manufacturers need to carry out testing to confirm the quality of large slag pot steel castings and to determine whether they can be put into use.
Cast steel slag pot is a workplace often used for iron tapping and slag tapping. After continuous production and practice, the slag pot used in solid smelting has the following problems
In the process of casting large slag pot, steel casting manufacturers sometimes encounter the defects of cracks or sand holes on the surface of castings,
The key taboos of cast steel slag pot to prevent molten steel are too high moisture of water and material, too high moisture of bearing equipment, poor slag quality, too fast feeding, too much materi...
